E-posters

1. Risk Assessment (1.A)

Application of statistical analysis for the identification of critical areas due to corrosion in atmospheric storage tanks
Ancione Giuseppa
University of Messina, Italy

Integrating knowledge graph, complex network and Bayesian network for data-driven risk assessment
Bai Yiping
China University of Mining and Technology, China

An extended procedure to predict flammable cloud generation resulting from tank overfilling scenario’s
Boot Hans
Gexcon Netherlands B.V., the Netherlands

A computational tool for rapid assessment of inherently safer design alternatives of chemical processes based on safety indices
Furda Patrik
Slovak University of Technology in Bratislava, Slovakia

Safety analysis as integral part of chemical processes intensification and integration
Labovská Zuzana
Institute of Chemical and Environmental Engineering, Slovak University of Technology in Bratislava, Slovakia

A risk aspect of periodic maintenance in process plants: a case of a pressure relief valve
Lee Shenae
NTNU, Norway

A Macro-systematic Accident Propagation Analysis for Preventing Natural Hazard-induced Domino Chain in Chemical Industrial Parks
Men Jinkun
South China University of Technology, China

A systemic approach methodology to measure process and plant safety
Rodriguez Manuel
Universidad Politecnica de Madrid, Spain

Advantages of the Recursive Operability Analysis in Updating the Risk Assessment
Soffientini Lorenza
DEKRA Italia s.r.l., Italy

A study of required information for risk assessment in management of change based on business process model
Takeda Kazuhiro
Shizuoka University, Japan

The periodical review of safety reports in France for upper-tier Seveso establishments
Vallée Agnès
Ineris, France

Multidimensional risk assessment in natural gas pipelines: Managing risk categories based on sensitivity analysis information
Viana Francisco
Federal University of Pernambuco, Brazil

1. Risk Assessment (1.B–1.E)

Development for Prediction Model for Environmental Condition of Deterioration Phenomena for Asset Integrity Management
Fuchino Tetsuo
Tokyo Institute of Technology, Japan

Green Hydrogen Production Routes: an Inherent Safety Assessment
Cipolletta Mariasole
University of Bologna, Italy

Safety of alternative energy sources: A review
Jankůj Vojtěch
VSB – Technical University of Ostrava, Czech Republic

Analysis of the ability to spontaneous combustion and ignition from hot plate of dried sewage dust
Półka Marzena
The Main School of Fire Service, Poland

Evaluation of safety scenarios for fires in waste disposal facilities through numerical simulations
Mocellin Paolo
Università degli Studi di Padova, Italy

Covid-19 pandemic influence on the presence of micro and nanoplastics in the environment
Roupcová Petra
VSB – Technical University of Ostrava, Czech Republic

Tackling the behaviour of vegetable oil fire in case of maritime accident: towards a crisis management decision support system
Aprin Laurent
IMT Mines Ales, Laboratory for the Science of Risks, France

Ignition and Self-heating Risk Assessment of Hydrocarbon Polluted Soils
Dufaud Olivier
University of Lorraine, France

The role of burning velocity in the validity of hybrid mixtures
Helegda Matouš
VSB – Technical University of Ostrava, Czech Republic

Flashpoint of Battery Mixtures in Order to Improve their Safety
Jastrzembski Tomáš
VSB – Technical University of Ostrava, Czech Republic

Autoignition temperature of alcohol/air mixtures
Poledník Jan
VSB – Technical University of Ostrava, Czech Republic

A simple hazard scenario identification method for risk assessment on chemical hazards to prevent fire and explosion for open space work
Shimada Yukiyasu
National Institute of Occupational Safety and Health, Japan

2. Security and safety (2.A–2.B)

Essential Aspects of Pressure Safety – Experiences from Industrial Practice
Duenger Udo
Covestro Deutschland AG, Germany

Critical Issues in Short-cut Modelling of Massive Carbon Dioxide Releases
Fabiano Bruno
University of Genoa, Italy

A numerical study of effects of an industrial hazardous release on people egress
Mocellin Paolo
Università degli Studi di Padova, Italy

Analysis of thermal load of pressure cylinders with flammable gases in fire
Mynarz Miroslav
VSB – Technical University of Ostrava, Czech Republic

Flammability of halogenated liquids: Flash points limits
Tribouilloy Benoît
French National Institute for Industrial Environment and Risks (Ineris), France

An exploratory study on uncertainty analysis in quantitative risk assessment of domino effects
Xu Yuanyuan
Delft University of Technology, the Netherlands

2. Security and safety (2.C–2.E)

Numerical simulation of LNG dispersion in harbours: a comparison of flammable and visible cloud
Carboni Mattia
University of Padova, Italy

Research into RDF fire and explosive hazards
Januszewski Janusz
Lodz University of Technology, Poland

Study on the synergistic effect of multicomponent gas mixture on the dynamic characteristics of gas explosion
Yang Xigang
Beijing Institute of Petrochemical Technology, China

Risk control of overtopping phenomenon after a catastrophic tank failure through optimized bund design
Zhang Bin
Nanjing Tech University, China

Combining CFD and experimental approaches to optimize a spray release in a 20 L sphere
El-Zahlanieh Stephanie
CNRS, France

Time dependence of gas-phase emissions from 3D printer filaments
Veznikova Hana
VSB – Technical University of Ostrava, Czech Republic

Thermal hazard analysis and quantification of thermal runaway limits of polymerizing monomers
Fujita Michiya
The University of Tokyo, Japan

Explosion characteristics of methane at low and elevated initial temperatures
Skřínský Jan
VSB – Technical University of Ostrava, Czech Republic

Driving dynamics study in fire truck drivers training on training polygon
Šudrychová Izabela
VSB – Technical University of Ostrava, Czech Republic

An approach for identification of integrated safety and security barriers in the chemical process industries
Yuan Shuaiqi
TU Delft, the Netherlands

3. Lessons learnt / Case studies

Resilient Safer Approach to cope the oily waste generation in industrial facilities: lessons learned from Cuban installations.
Castro Rodriguez David Javier
Politecnico di Torino (POLITO), Italy

Experience Report on Adiabatic Reaction Calorimetry in Safety Engineering
Delibalta Ömer Faruk
Evonik Operation GmbH, Germany

Hazardous Spray Release from a Pipeline under Maintenance: Causes and Lessons Learned by a Combined Accident Analysis Perspective
Fabiano Bruno
University of Genoa, Italy

Learning from incidents at Seveso sites: a focus on the safeguarding of containments prior to start of operations
Manuel Henk Jan
RIVM (Dutch National Institute for Public Health and the Environment), the Netherlands

Evaluation of the management of explosive atmospheres in milling companies: the Île-de-France region example
Janès Agnès
Caisse Régionale d'Assurance Maladie d'Ile-de-France (Cramif), France

Ammonia pressure station in SEVESO establishment – Case study focused on the impact on the environment
Sikorova Katerina
VSB – Technical University of Ostrava, Czech Republic

The role of carbon in explosion of dust-air mixtures
Ryšavý Jiří
VSB – Technical University of Ostrava, Czech Republic

4. Human & organisational factors

A Risk-Based Grey Relational Analysis for Identifying Key Performance Shaping Factors to Promote the Management for Human Reliability during Shipping LNG Offloading
Zhang Renyou
Beijing Institute of Petrochemical Technology, China

5. Leadership and risk communication

Simulations and their use in verification of preparedness
Brumarová Lenka
VSB – Technical University of Ostrava, Czech Republic

Organizational solutions for employee training to be included in the safety management system
Gajek Agnieszka
CIOP-PIB, Poland

© 2020–2022 GUARANT International spol. s r. o.